Bullseye glass offers an extensive palette of colours and a family of materials that can take a project from cut sheet glass to detailed surface decoration, layered imagery or kilncast sculpture. Its appeal extends from a beginner making a first dish to an experienced artist developing complex patterns and controlled chemical reactions.
Choosing it successfully involves more than picking attractive colours. You need to understand which products are suitable for fusing, how colours respond to heat, how different forms behave, and what compatibility actually means. This guide explains those decisions and compares Bullseye with other common options.
Bullseye Glass Co. makes art glass in Portland, Oregon, USA. Its range serves kilnforming, stained glass and mosaic work, with hundreds of colours and styles. The company has produced hand-cast art glass since 1974. [1]
For a kilnforming project, look for products explicitly identified as fusible or Bullseye Compatible. A manufacturer's name alone should not replace checking the description of the particular product.
Kilnforming covers several processes. Fusing joins pieces together; slumping bends glass over or into a mould; kilncasting forms glass in a refractory mould. These processes demand different combinations of temperature, time, preparation and controlled cooling.
Bullseye's range is useful because a design can combine broad areas of sheet glass with finer details in other forms. However, availability varies by colour and product: finding a colour as sheet glass does not mean it is offered in every accessory form. Consult the working notes for the exact style and form you intend to use. [1]
Transparent glass transmits light and allows objects or layers behind it to remain visible. It suits windows, illuminated panels and layered compositions where depth is part of the design.
Its appearance depends strongly on the setting. A transparent blue seen against a white background can look different when displayed against a dark wall. Overlapping colours also change the result: evaluate a combination under the lighting in which the finished piece will be viewed.
For example, if your design relies on a pale transparent colour, make a sample at the planned thickness rather than judging a single thin offcut. The practical question is how the finished construction looks.
Opalescent glass scatters light and can provide a more opaque field of colour. It is useful for graphic shapes, backgrounds and designs that need to read clearly without backlighting. Opalescent styles vary in opacity, so the category does not guarantee that every colour will hide everything underneath.
A white base is often a useful starting point for evaluating decorative colours. However, different whites have different working properties. Select a specific style and record its number instead of treating all white glass as interchangeable. Bullseye's product information distinguishes opalescent, transparent and clear styles and provides individual working notes. [1]
Streaky glass combines colours within a sheet. It can suggest water, stone, foliage or movement without requiring the maker to build every detail from separate pieces.
Cut placement becomes part of the design. A long strip taken along a streak may suggest a horizon; a piece cut across it may produce a completely different effect. Before cutting, move a paper window over the sheet to choose the most useful area.
Because pattern placement varies, purchase the actual sheet when the pattern matters. A small catalogue swatch cannot show the complete composition of a larger sheet.
Clear glass can serve as a base, a cap or a structural layer. Bullseye's Tekta range offers clear sheet options, including Clear and Crystal Clear. Choose the exact product with its thickness and optical appearance in mind. [2]
A clear cap also changes the physical construction. Adding one increases total thickness, can enclose air, and may alter the way decoration spreads during firing. Include it in your test rather than adding it as an untested final step.
Bullseye's iridescent glass has a thin tin-based surface coating that produces metallic, shifting colours. It is distinct from dichroic glass.
Coating orientation matters. Fired face up, against a shelf or between layers, the same glass can produce different effects. Bullseye recommends Shelf Primer when the iridescent side faces the shelf because ThinFire can pit some coatings. Buried coatings can also affect bubble shapes, while substantial stretching may break the coating into patterns. [3]
Test the intended orientation and separator before committing a valuable sheet to a large project.
Sheet glass supplies the main shapes and layers in many fused projects. Most Bullseye colour styles are offered in nominal 3 mm and Thin 2 mm versions. Handcrafted sheets have approximate dimensions and rolled edges, so allow for trimming when calculating usable material. [4]
Three-millimetre sheet is convenient for many layered constructions. Thin sheet offers another way to control material volume and build details. Neither thickness determines the firing schedule on its own; the complete assembly matters.
Frit is crushed glass graded by particle size. Bullseye offers powder, fine, medium and coarse grades, with extra-large frit available in clear. [2]
Larger particles suit visible granules, scattered accents and textured surfaces. Finer material allows smaller marks and closer control over coverage. Powder supports shading, stencilling and imagery on sheet glass. [5]
Particle size also changes the internal appearance of thicker work. Bullseye's frit-tinting guidance shows that coarse mixes can produce fewer, larger bubbles than finer mixes. [6] Therefore, powder and coarse frit of the same colour should not be expected to create identical results.
For practical sampling, place measured quantities on labelled tiles. Record the weight or coverage as well as the colour: “a little blue powder” is difficult to reproduce.
Stringers are slender lengths of glass suited to lines, grids, outlines and repeated patterns. Bullseye offers several diameters, including fine 0.5 mm stringers in selected styles. [7]
They are useful when cutting a similarly narrow strip from sheet would be awkward. When designing a grid, decide whether the crossing points should remain raised or merge into a flatter surface, then test the relevant firing approach.
Rods provide material for torchwork and other applications. Bullseye publishes form-specific working notes, including torch information, because a colour's behaviour in the flame deserves separate attention. [1]
Confetti consists of thin flakes that can introduce delicate fragments of colour. Ribbon provides flat, narrow elements for linear decoration. Billets, cullet and casting cuts offer alternatives for filling casting moulds. These belong to Bullseye's wider accessory range. [8]
Choose the form around the effect and process. For a casting where clarity is important, the size and number of glass pieces affect the opportunities for trapped air; Bullseye notes that feedstock form directly influences casting clarity. [2]
Bullseye is commonly sold under the shorthand “COE 90”. That label is useful for recognising a product category, but it is not a complete compatibility specification.
The coefficient of expansion describes thermal expansion over a defined temperature range. Compatibility also depends on viscosity and behaviour through the transition from soft glass to rigid glass. Bullseye explains that glasses with matching COE values can still be incompatible. [9]
Do not assume that another brand's “90” glass can safely be fused with Bullseye. Likewise, decorative glass, bottle glass and unidentified offcuts should not enter a Bullseye project simply because they melt.
An incompatible combination may retain stress after cooling. Giving it a longer annealing hold does not correct a fundamental mismatch.
For routine work, use materials within an established tested-compatible system and check the particular product's identification. For experimental combinations, use an appropriate compatibility test rather than relying only on whether a small sample survives its first firing.
Unusually high temperatures, extended processing and heavily worked torch components also warrant testing under the actual process planned for the finished piece. Bullseye explicitly identifies such conditions as reasons to conduct additional tests. [4]
A striker develops its intended colour through firing. An unfired piece may look paler or quite different from its eventual colour. Bullseye identifies striker styles in its product information; Red Transparent 001122 is one example. [10]
This matters when buying online and when sorting scraps. A colourless-looking fragment could be a coloured striker, so retain identification rather than sorting solely by cold appearance.
For a new striker, consult its working notes and fire a representative sample. If the project involves several firings, carry the sample through those steps too.
Heatwork describes the combined effect of temperature and time. Two schedules reaching the same peak can produce different results because they spend different amounts of time heating and holding.
Bullseye warns that colour can vary between production runs and may change with repeated firing or extensive heatwork. Its recommended approach is to test using the processes planned for the finished piece. [4]
For a matching set of panels or dishes, reserve sufficient material from the same production run where possible. Keep a fired reference tile alongside the remaining stock so later decisions are based on the actual result.
Some Bullseye colours react where they contact other glasses or metals. The reactive-potential chart groups styles by relevant chemistry, including copper, sulfur/selenium, lead and special reactive formulations. [11]
These effects can create outlines, earthy boundaries and mottled colour. They can also be unwelcome when a design calls for clean divisions.
A documented example is copper-bearing Turquoise Blue Opalescent 000116 against sulfur-bearing French Vanilla 000137. Bullseye shows earth-toned reactions at their interfaces. The same turquoise against White 000113 does not produce that particular reaction. [12]
This demonstrates why choosing “a cream or white background” is insufficient when chemistry matters. A visually small substitution can change the fired result.
Reactive effects and compatibility are separate questions. A visible reaction is not automatically evidence of an expansion mismatch.
For a first reactive project, make a sample grid of the exact combinations. Include the planned sheet, frit or powder form because contact area and construction affect the appearance. Treat a clear separating layer as another experiment to test rather than a guaranteed cure.
A tack fuse joins components while retaining substantial relief. A full fuse allows layers to merge more completely and edges to round. Slumping reshapes a prepared piece using a mould.
Bullseye's Heat & Glass notes describe broad behaviour ranges, including slumping during suitable holds around 621–677°C and full fusing towards the upper end of approximately 760–816°C for layered constructions. These describe material behaviour, not universal programmes. [13]
A textured project may need less heatwork to preserve detail. A flatter project may need more, but increasing temperature can also change bubbles, edges and colour.
Under suitable full-fusing conditions, unrestrained glass tends towards a thickness of roughly 6 mm as gravity and surface tension interact. A thin single layer may pull inward and thicken at its edges; a thicker stack may spread. Dams or moulds can constrain movement. [13]
This is a planning principle, not a promise that every piece will finish at exactly 6 mm. The amount of glass, firing conditions and containment all matter.
If maintaining dimensions is essential, calculate material volume and test the construction before scaling it up.
A firing schedule must address initial heating, air release where required, the forming process, annealing and final cooling. Bullseye's schedule-writing guidance considers thickness, uniformity, insulating or reflective components, and whether glass is being reheated. [14]
Start with manufacturer guidance appropriate to the construction. Record results and make deliberate adjustments. Changing peak temperature, hold time and heating rate together makes it difficult to identify which change helped.
Annealing allows stress to relax while temperature becomes sufficiently uniform, followed by controlled cooling through the relevant range. Bullseye recommends a 482°C annealing soak in its current thick-slab guidance. The hold and cooling rates must suit the work. [15]
A common mistake is to choose annealing solely from the base-sheet thickness. Raised decoration creates uneven thickness and can complicate temperature distribution. Bullseye specifically warns that tack-fused work requires longer schedules; its guidance also accounts for kiln configuration. [16]
Use the appropriate annealing guidance for the full construction. A large, uneven or sculptural piece deserves its own assessment.
Air can become trapped between layers or beneath glass. Sometimes bubbles contribute to a design; sometimes they interrupt an image or weaken its visual clarity.
Bullseye describes using holds in the 621–677°C region to help reduce trapped interlayer air. [13] However, layout matters too. Consider where air can escape before the edges seal.
For a layered image, test the complete stack, including any clear cap. A simplified sample may omit the very feature causing the problem.
Devitrification is crystal growth on the glass surface, often appearing as haze or scum that cannot simply be washed away. Bullseye describes remedial approaches involving adding or removing material before refiring. [17]
Do not assume that every cloudy area has the same cause. Inspect the surface, construction and firing record before deciding on a remedy.
Bullseye recommends removing oils, labels, marker residue and other contamination, then buffing the glass dry. Its cleaning guidance cautions that cleaners and towels can introduce residues and recommends testing products on both transparent and opalescent glass. [18]
Choose a repeatable cleaning method and use clean, lint-free cloths. Pay particular attention to coldworked edges, where contamination can become trapped. Cleaning is part of preparing the finished surface, not a cosmetic step after assembly.
There is no universal best glass for every studio. Compare complete working systems: palette, accessories, documentation, local supply and the processes you intend to use.
Option
What makes it worth considering
Main compatibility consideration
Bullseye Compatible
Extensive colour and product choices, reactive possibilities and detailed working notes
Use identified compatible products; “90” alone is insufficient
Oceanside Compatible
Another established kilnforming system; relevant to studios with authentic System 96 stock
Oceanside confirms compatibility with authentically branded original System 96 products
Wissmach 96
A separate fusible range with sheet glass and accessories
Wissmach confirms compatibility within its own 96 line and advises testing other manufacturers' products
Other glass, including unidentified scraps
May suit an independent experiment or a different technique
Do not assume compatibility with any of the systems above
Oceanside warns that a generic “COE 96” label does not establish compatibility with its certified products. It also describes its glass as reaching a given viscosity with less time or heat than common COE 90 products, so schedules should be adapted when changing systems. [19]
Wissmach similarly states that its 96 products may not be compatible with other companies' 96 glass. [20]
For someone already producing successful work in another system, switching should solve a specific need: a desired colour, accessory form or effect, for example. Keep different systems clearly labelled and physically separated.
Bullseye's practical strengths are its range of materials and the detail of its technical information. Those are especially valuable when a project depends on a particular colour's chemistry or fired behaviour.
The corresponding commitment is learning the material. Strikers, reactions and specialised coatings reward preparation. Handmade variation can enrich an individual artwork while requiring closer sampling for a matching series.
Assess cost by the planned project rather than a single sheet price. Include usable area, trimming, test pieces, accessories, delivery and the cost of obtaining replacement stock. Compare actual local quotations; a general claim that one brand is always cheaper is unlikely to help every buyer.
For a first purchase, a modest palette is often more useful than a large assortment. Choose a base, a few colours and one detail form around a specific project. Buy additional materials as you establish what your process needs.
Glass powder creates an airborne-dust concern. Bullseye recommends ventilation, a NIOSH-approved respirator and HEPA-filtered vacuum equipment for powder work. Follow the product safety information and relevant local requirements. [21]
Cutting, grinding, kiln operation and mould preparation also require suitable equipment and working methods. Establish these before expanding into unfamiliar techniques.
Choose a small project whose construction you can describe clearly: intended dimensions, layer thicknesses, decoration and desired surface.
Record the exact glass styles, then check their working notes. Make a sample using the complete intended construction and firing sequence. Evaluate it in the lighting planned for display, and keep the tile with its firing record.
Once that result is satisfactory, scale up thoughtfully. Larger dimensions, uneven relief or a new mould can introduce requirements that the small sample did not test.
Bullseye gives makers many ways to build colour, depth and texture. The most reliable results come from choosing each material for its role, checking its behaviour and keeping enough information to repeat what works.
Technical information checked 24 October 2026. Product availability and working notes can change.